The RAINSAVER MK4E is an Automatic Rainwater/Mains Water Changeover Device designed to provide automatic mains backup for pressure pump supply systems.
Typical Applications Rainsaver MK4 Pump Package with Fully Automatic Multistage Technopolymer Submersible Pump
The DAB-DIVERTRON1200 with the new Rainsaver MK4 is ideal for large two storeys or multi storey homes to service toilets, laundry and garden taps supplying 70 lpm @ 200kpa. THe submersible pump is mounted inside the rainwater tank for silent operation.
Rainsaver MK4 Control Features
Requires no power supply and consumes no electrical energy
Designed to operate with mains pressure up to 1000kPa (145psi)
Pump flows to 105lpm, mains flows to 40 l/m (at 500kPa mains)
Designed to further save water resources by reducing incoming mains to 200 kPa
Requires no weather proofing and is completely waterproof
Can be hosed down without the fear of electrocution
Can be mounted any distance from the pump underground or inside a tank
UV stabilised Technopolymer for long life and good looks
All Rainsaver MK4 pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart
WaterMark approved components for connection to all Town Water supplies. Safe against water borne bacteria, dezincification and lead poisoning. Watermark Level 1 Certification to ATS5200.477.2006
No unsightly controller power, water level float cables or the need for a dedicated controller power point
Australian owned and designed
2 Year Rainsaver MK4 Warranty (Warranty Service is provided at the nearest authorised service agent)
Fully Automatic Multistage Technopolymer Submersible Pump with internal auto restart pump controller
Automatic built in electronic control provides dry run protection and constant pressure at low flows with built in check valve and auto restart.
Corrosion resistant pump body, diffuser and impeller.
Shaft seal with sand protection boot
240v single phase TEFC motor with built-in auto reset thermal overload
AS/NZS4020 Approved for drinking water
750 Watt pump
470kpa maximum pressure
95lpm maximum flow
2-35 degrees Celcius clean water temperature range