The Pantera pool pumps have been specifically designed to incorporate features that will provide reliable and efficient pump operation.
The new technology wet end design integrates a unique moulded end-shield cover and lip seal protecting the motor from water damage making this range ideal for in-ground or above ground pools.
The PPP550 is a .75 hp pump and is suitable for above ground pools and small pools.
5 levels of corrosion resistance. Standard industry practice to protect pool pump motors from water ingress is normally only on two levels, a mechanical seal and flinger shaft sleeve. With over 30 years of experience selling into the pool industry, Onga know the more protection you give the motor, the better off you are and that’s why they build five levels of motor protection into the Pantera range of pool pumps.
Stainless steel motor shaft extends the life of the pump shaft by utilising corrosion resistant stainless steel.
Rest easy knowing your Pantera pool pump has passed all stringent Australian Standards AS/NZS 3136:2001 for safety and is approved for installation within the wetted zone of the pool area. Approvals: V99108, V02301, V02302.
Incorporating an elevated mount into the pump design keeps moisture well away from the motor.
Easy to clean large hair and lint pot with clear lid so that you can check at a glance whether it is full or not.
Having a low friction o’ring on the lint pot means you only need to tighten the lid by hand. No tools are necessary and because you only tighten by hand, removing the lid is a simple task.
Onga’s unique 5 degree self-aligning barrel unions make pipe work connection a breeze.
Maximum working pressure: 295 kPa
Swimming pool water temperature range: 5 degrees Celsius to 35 degrees Celsius