The RAINSAVER MK5 is an Automatic Rainwater/Mains Water Changeover Device designed to provide automatic mains backup for pressure pump supply systems.
The RAINSAVER MK5 is designed to be installed in conjunction with a pressure pump supply system that is fitted with an independent pressure and flow controller with loss of prime protection and 24 hour auto restart. No need for a float switch.
The RAINSAVER MK5 supplies clean rainwater from a rainwater tank via an automatic pressure system pump to toilets, laundry and garden taps in a household.
Mains water is also connected to the RAINSAVER MK5 as an automatic back up should rainwater level be too low, or if there is a power failure.
The Bianco INOX 60S2MPCX with the new Rainsaver MK5 is ideal for a single and two storey homes to supply water to toilets, washing machine and a garden tap supplying 60lpm @200kpa.
Rainsaver MK5 Control Features
Stainless steel electric jet pump with presscontrol
Requires no power supply and consumes no electrical energy
Designed to further save water resources by reducing the incoming mains to 200kPa
Requires no weather proofing
Completely waterproof - can be hosed down without the fear of electrocution
UV stabilised Technopolymer for long life and good looks
All Rainsaver MK5 pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart
WaterMark approved components for connection to all Town Water supplies. Safe against water borne bacteria, dezincification and lead poisoning. Watermark Level 1 Certification to ATS5200.477.2006
No unsightly controller power, water level float cables or the need for a dedicated controller power point