The RAINSAVER MK6 is an Automatic Rainwater/Mains Water Changeover Device designed to provide automatic mains backup for pressure pump supply systems.
The RAINSAVER MK6 is designed to be installed in conjunction with a pressure pump supply system that is fitted with an independent pressure and flow controller with loss of prime protection and 24 hour auto restart. No need for a float switch.
The RAINSAVER MK6 supplies clean rainwater from a rainwater tank via an automatic pressure system pump to toilets, laundry and garden taps in a household.
Mains water is also connected to the RAINSAVER MK6 as an automatic back up should rainwater level be too low, or if there is a power failure.
Typical Applications The DAB-JETCOM82MPC2 with the new Rainsaver MK6 is ideal for single or two storey homes to service toilets, laundry and garden taps supplying 60 lpm @ 200kpa.
Rainsaver MK6 Control Features
Requires no power supply and consumes no electrical energy
Designed to operate with mains pressure up to 1000kPa (145psi)
Pump flows to 105lpm, mains flows to 40 l/m (at 500kPa mains)
Designed to further save water resources by reducing incoming mains to 200 kPa
Requires no weather proofing and is completely waterproof
Can be hosed down without the fear of electrocution
Can be mounted any distance from the pump underground or inside a tank
UV stabilised Technopolymer for long life and good looks
All Rainsaver MK6 pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart
WaterMark approved components for connection to all Town Water supplies. Safe against water borne bacteria, dezincification and lead poisoning. Watermark Level 1 Certification to ATS5200.477.2006
No unsightly controller power, water level float cables or the need for a dedicated controller power point
Australian owned and designed
2 Year Rainsaver MK5 Warranty (Warranty Service is provided at the nearest authorised service agent)